|
MPCI-1394
-
Two IEEE1394 (Firewire) Ports
MPCI-1394 is a MiniPCI module that provides two IEEE 1394 interfaces, accessible via IDC10 connectors. With the included adapter cables from IDC10 to standard 1394 connectors, any 1394 device can be connected to the module.
The used controller VIA Fire IIM VT6307 is a single-chip, low power 2-port IEEE 1394 host controller providing PC systems with high speed, flexible connectivity to a wide range of peripherals and consumer electronics.
Get the Short Description.
MPCI-SEREX
-
Two RS232/RS422/RS485 Ports
The Mini-PCI Serial Extension is an extension board developed especially for LiPPERT’s Thunderbird Mini-ITX-Mainboard, but it can be generally used on every board which features a MiniPCI connector. The adapter adds two serial ports to the system. The UART's are compatible to the standard 16C550. The line interface can be configured with jumpers for the RS232, RS484 or RS422 standard
Get the Short Description.
|
|
|
CEx MITX
-
Mini-ITX Trägerplatine für COM Express Module
The Mini-ITX carrier board for COM Express modules provides an easy and inexpensive way to use COM Express modules like LiPPERT's Toucan. The carrier board brings the Toucan's interface out on standard connectors, making the Toucan readily usable for computing. As an additional bonus, a second Gigabit Ethernet port is integrated on the carrier board.
|
|
PC/104P-3MPCI
-
PC/104-Plus Adapter für drei MiniPCI Karten
The PC104P-MiniPCI board features three mini PCI slots on a PC/104-Plus board. These slots hold standard mini PCI cards, such as laptop WLAN cards or LiPPERT’s own, spezialized mini PCI cards.
The PC104P-MiniPCI‘s PCI resources, PCI Clock, ID Selection, Request, Grant, and Interrupt are selectable with rotary switches. Only a 5 V power supply over the PC/104-Plus is needed. The build-in 3.3 V supply delivers up to 600 mA to each of the the miniPCI cards.
The module is transparent to the software, hence all operating systems including Windows XP and Linux can be used.
Downloads:
Data sheet |
|
PC/104P-USB20
-
PC/104-Plus - Quad Universal Serial Bus (USB 2.0) Controller
Four USB 2.0 compatible ports on a single PC/104-Plus module. Transmission speeds up to 480 Mbit/s are supported. Compatible to all USB protocol versions.
|
|
PC104P-ETH Ethernet Modul
-
PC/104-Plus - vierfach LAN Board
PC104P-ETH4 integriert vier integrierten Ethernet-Controller auf einem PC/104-Plus-Board. Die verwendeten Intel 82551-Controller werden von praktisch allen Betriebssystemen unterstützt, was die Software-Integration stark vereinfacht. Die PCI-Bus-Ressourcen des PC104P-ETH4 (PCI Clock, ID Selection, Request, Grant und Interrupt) werden mit Drehschaltern selektiert. Ein separat montierbares "Connection-Board" mit vier RJ45-Buchsen befindet sich im Lieferumfang. Versorgt wird das Board mit 5V vom PC/104-Plus-Bus.
Downloads: Datenblatt (1.4MB), Technical Manual (820KB)
|
|
CoreExpress®-ECO-Evaluation Kit
-
Starter Kit with carrying case.
-
CoreExpress® - COM Module - Intel® Atom™ Processor
The CoreExpress evaluation kit contains all hardware and software necessary to test and evaluate the CoreExpress-ECO board.
The CoreExpress-ECO module is an advanced technology computer on module (COM) based on the Intel Atom Z5xx processor. This processor offers the best performance-per-watt figures of an X86 module and is complemented by a chipset with integrated graphics. It comes with 2 PCI Express lanes, 8 USB ports, PATA and other digital-only buses.
The evaluation kit comes in a sturdy carrying case and contains the CoreExpress-ECO module, mounted on a carrier board, a large 13.3" TFT display panel, all required cables and a power supply. To ease software setup, either Windows® XP or Linux™ is pre-installed on the included Compact Flash disk. A complete documentation set rounds the kit off.
The evaluation kit is covered by three free hours of direct manufacturer support.
The user only needs to connect a USB keyboard and mouse, the provided display panel, and possibly a USB based touch module, to get a fully operating demo system. See www.CoreExpress.com for more information about the CoreExpress™-Format.
|
|
PCI-104 to PC/104 Bridge
-
Muiltfunctional Card For The Cool RoadRunner 4
The S-104P-B2I board is an accessory board for PCI-104 CPU boards like the Cool RoadRunner 4.
It provides all standard legacy I/O devices for the CPU board, like two serial ports, a parallel port and a floppy controller. Its PCI-to-ISA bridge gives the user the possibility to use standard PC/104 I/O boards together with a PCI-104 CPU board.
Furthermore it adds two IEEE 1394 ports, utilizing a VIA6307 FireWire controller.
The serial ports can be configured with software to act as an RS232 or RS485/RS422 interface. The necessary termination resistors in RS485/RS422 mode can be activated with jumpers. The parallel port supports all standard modes SPP, EPP and ECP, respectively. The floppy controller supports one 1.44 MB slim line floppy disk drive, which is connected using a flex foil cable. All standard interfaces are located on 2.54 mm IDC headers. A cable set is
available to provide the standard PC connectors.
The PCI-to-ISA bridge supports all data accesses to I/O or memory devices on the PC/104 bus.
Interrupts and DMA are also supported. The DiskOnChip socket allows to add M-Systems DiskOnChip2000 modules as mass storage device. The DiskOnChip is located in a memory window of the CPU. The address range is
selectable with software.
The programmable Multi-I/O controller is a Xilinx Spartan XC2S15 FPGA device. It is fully connected to the ISA bus and can be programmed from the CPU board. A connector with twenty I/O signals from the FPGA can be used to interface to external hardware. This gives the user the ability to add specialized I/O functions like digital I/O, counters or other custom interfaces to the CPU board.
Downloads: Datasheet (0.8MB)
Links: Cool RoadRunner 4
|
|
|
|
