104X-E4690
-
Embedded PCI/104-Express Graphics Controller
The 104X-E4690 is a PCI/104-Express graphics card with an ATI Radeon™ E4690 graphics processor for embedded applications with an excellent performance power ratio. The board adds unprecedented graphics performance to an embedded PC on a small 3.78” by 3.55” printed circuit board.
|
|
EXP-ISO-COM8 
EXP-ISO-COM8 is an EPIC add-on module, comprising eight independent and flexibly configurable serial ports for RS232 / RS422 / RS485 line levels.
|
EXP-ETH8
EXP-ETH8 is an eighfold Ethernet extension board for EPIC Express CPUs, which can also be used as a carrier board for PCI/104 Express processor boards.
|
 |
 |
MPCI-1394
-
Two IEEE1394 (Firewire) Ports
MPCI-1394 is a MiniPCI module that provides two IEEE 1394 interfaces, accessible via IDC10 connectors. With the included adapter cables from IDC10 to standard 1394 connectors, any 1394 device can be connected to the module.
The used controller VIA Fire IIM VT6307 is a single-chip, low power 2-port IEEE 1394 host controller providing PC systems with high speed, flexible connectivity to a wide range of peripherals and consumer electronics.
Downloads:
MPCI-SEREX
-
Two RS232/RS422/RS485 Ports
The MiniPCI Serial Extension is an extension board developed especially for LiPPERT’s Thunderbird Mini-ITX-Mainboard, but it can be generally used on every board which features a MiniPCI connector. The adapter adds two serial ports to the system. The UART's are compatible to the standard 16C550. The line interface can be configured with jumpers for the RS232, RS484 or RS422 standard
Downloads:
|
|
|
|
|
CEx MITX
-
Mini-ITX Carrier Board for COM Express Modules
The Mini-ITX carrier board for COM Express modules provides an easy and inexpensive way to use COM Express modules like LiPPERT's Toucan. The carrier board brings the Toucan's interface out on standard connectors, making the Toucan readily usable for computing. As an additional bonus, a second Gigabit Ethernet port is integrated on the carrier board.
Link
|
|
|
|
|
PC/104P-3MPCI
-
PC/104-Plus Adapter for three MiniPCI Cards
The PC104P-MiniPCI board features three mini PCI slots on a PC/104-Plus board. These slots hold standard mini PCI cards, such as laptop WLAN cards or LiPPERT’s own, spezialized mini PCI cards.
The PC104P-MiniPCI‘s PCI resources, PCI Clock, ID Selection, Request, Grant, and Interrupt are selectable with rotary switches. Only a 5 V power supply over the PC/104-Plus is needed. The build-in 3.3 V supply delivers up to 600 mA to each of the the miniPCI cards. The module is transparent to the software, hence all operating systems including Windows XP and Linux can be used.
Downloads:
|
|
PC/104P-USB20
-
PC/104-Plus - Quad Universal Serial Bus (USB 2.0) Controller
Four USB 2.0 compatible ports on a single PC/104-Plus module. Transmission speeds up to 480 Mbit/s are supported. Compatible to all USB protocol versions
|
|
|
|
|
<< Start < Prev 1 2 Next > End >>
|
|
Page 1 of 2 |
